1/32 Tamiya F-14A Tomcat

by Daniel

--------------------

 

Now I’m again back at modelling aircraft after some 1/700 US Ships including Trumpeter’s Blue Ridge and Tamiya’s Indianapolis. Recently I cleared some of my older 1/32 jets of dust and again took the plan to purchase and build another big scale fighter jet. Having already done Academy’s F/A-18C and Tamiya’s F-15E and F-16CJ I decided to try my skills on a Tomcat I found at a local hobby store. The Tamiya kit is very easy to build altough I had to fill some “leaks” on the fuselage, especially the bow/main body joint. I didn’t use any aftermarket set, in Switzerland they aren’t as easy to purchase and in my opinion, only the bad cockpit armatures could be improved.

Click on images below to see larger images

My Tomcat carries a standard OEF/OIF loadout, comprising two AIM-9L Sidewinders, a Phoenix, a LANTIRN, two GBU-24 LGBs and two drop tanks. I added also two JDAM which I took from the F-16CJ, although I don’t know if there were any F-14As which could drop these munitions. I decided to build the nose section in open position to show the radar which I improved a little bit using some wire. Next I changed the position of the pilot, showing him now climbing into the canopy. The GBU-24 and JDAM were also improved by a coat of fire-resistant paint which I mixed of some “Decoupaste” providing a coarse, relief style surface and Tamiya grey.

After sanding and rescribing some destroyed details I painted the whole thing in my own light grey I mixed of Tamyia colors. Then I did a weathering I’ve never done before; having read Kaan Göks very useful article in the ARC Tools’n’ Tips section, I used some oil pastels and mixed Tamiya “Smoke” to do the most weathered details. In applying some darker or lighter spots and finally spraying the whole thing with a layer of the much thinned basic color I finished it. After a layer of Revell “clear” I applied the nice kit decals of VF-14 “Tophatters” stationed at the “Enterprise”. In the end, a layer of Revell “Flat Base” was applied to produce a common surface.

Daniel

Click on images below to see larger images

Photos and text © by Daniel