The Focke-Wulf Ta-152 was a World War II Luftwaffe high-altitude interceptor fighter aircraft.
The
Ta-152 was a development of the Focke-Wulf Fw-190 aircraft, but the prefix was changed from "Fw" to
"Ta"' to recognize the contributions of Kurt Tank who headed the design team.
The number 152 was chosen as the type was Tank's 152nd design. It was made in three versions — the
Ta-152H Höhenjäger, the Ta-152C designed for slightly lower altitude operations using
a different engine and smaller wing, and the Ta-152E fighter-reconnaissance aircraft with the engine of the H model and
the wing of the C model. The first Ta-152H entered service with the Luftwaffe in October 1944 but only 67 production aircraft
were delivered until the end of the war. This was too late to allow the Ta-152 to have a significant impact on the war effort.
(source:en.Wikipedia.org)
Click on
images below to see larger images
You may take a look at Construction procedure http://www.helmo.gr/forum/index.php?topic=368.0
The aircraft shown here, is
the green “4”, one of the few Ta’s from Stab/JG301, in late 1944 in an almost “factory fresh” condition. (My next Ta-152 will be
in a very “battle & weathered state”.)
In conclusion, regarding this
scale kit, it needs some experience to build, patience and good planning for your
each step in the construction. As I mentioned above, I would like to build one more
–not right now- and having the know-how I believe the next one will be better
than this.
-PAINTING-
Gunze RLM 82-83-76 were the main colours of the camo
The swastikas, wing crosses, fuselage red-and-yellow band and
the green "4"were created with masking tape and then painted with
airbrush.
All the small things like antenna wire, radar antenna, pilot’s
step, pitot tube etc are scratch built.
I wish to all of you happy new year an keep modeling !
Michael Ezat
Click on
images below to see larger images
|