Here's a new set of
resin 1/48 P-51D/K Gun Fairings from Ultracast
designed to fit the Tamiya
P-51D/K & F-51 kits. You replace the horrible kit a parts with
these finely crafted resin gun fairings.
Above photo shows Tamiya and Ultracast fairings.
These fairing sections and gun details were
designed from factory drawings and eliminate the tedious and
frustrating job of eliminating the leading edge seam while trying to
preserve the details. Some care will be needed to carefully
remove these sections from the wings. This is best done before
the wings have been glued together. Leave a little extra
material and slowly remove it, test fitting the new inserts as you
go.
Click on
images below to see larger images
There are 2 fairings in each
set...enough for one model.
Clean up is very minimal and the fairings come attached to the casting blocks with
very easy to manage connection points and removal is easily done with no loss of
detail. The detail level and casting quality is flawless.
Steve
I would like to
thank Ultracast
for providing me with this
review sample.
|