This new resin 1/48 Pod KB early
Chaff Dispenser by Maestro
Models Conversions from Rebell
Hobby was used on the
S35E Draken, AJ/SH/SF37 and Sk37E Viggen. This set includes a pod
connected to a pylon and 4 photo etch vortex generator fins for the rear of the
pod.
Click on
images below to see larger images
To install you simply cut the pod/pylon unit form
the casting block. On the rear of the pod you will need to drill a tiny
hole and insert a metal rod that will need to extend from the rear of the
pod by 2.5mm. Then you attach the 4 PE fins as per the instructions and
attach it to your model. Often using metal pins between the pylon and wing
attachment point will insure the pod stays firmly in place.
The detailing is nicely done as you can see in
the above photo.
The instructions are clear and
include 2 photos/drawings to help you to get everything right.
Steve
I would like to
thank Rebell
Hobby for
providing me with this review sample. This is available direct from http://www.rebell.com.
Rebell
Hobby will
have more items for the Draken and Viggen in the future from Maestro Models Conversions.
|