Hello, Fans &
Residents of ARC!
This is my
first time to ARC and here's my humble rendition of the Academy Razorback F-16,
built out of the box with some minor scratch detailing here &
there. I'm not an expert, so you will have to excuse any
technical errors of this particular jet.
Decals were from the
kit.
Paints used were Tamiya,
Gunze, Humbrol & MM.
Click on
images below to see larger images
|
|
|
|
I had some fit
problems with the wing-fuselage joint and the nose cone-upper fuselage
half. Lots of putty and some CA was used to fix the wing joint.
I used some scrap stretched sprue to fill up the gap of the nose cone.
I modded the front office
instrument panels and seat with some 2 part epoxy putty (Tamiya) to add
some flavour. It's not perfect, but at least it's an improvement (to
me anyways) to just using decals. Tape was used for the seatbelts.
Click on
images below to see larger images
|
|
|
I suppose the three rail AGM
launcher is no longer in fashion, but I used it anyway since I didn't have /
scratch the single rail.
Until next time, happy modeling
wishes to all.
Questions / comments welcome.
Jason
Malaysia
Click on
images below to see larger images
|
|
|
|